7 Series E65 740i (N62TU) SAL
11 78 540
Replacing left oxygen monitor sensor (N62 /
N62TU)
Special tools required:
•
11 7 030
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Switch off ignition.
•
Remove rear underbody protection
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Unlock and detach plug connection (1) for monitor sensor (2).
Unclip monitor sensor cable.
Release monitor sensor (2) with special tool 11 7 030 .
RA Replacing left oxygen monitor sensor (N62 / N62TU)
BMW AG - TIS
11.02.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
