7 Series E65 740i (N62TU) SAL
12 90 100
Replacing fan for electronics box (N52)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read and print out fault memory with MoDiC or BMW DIS
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
Disconnect battery.
•
Remove right microfilter air duct
Important!
Follow instructions for removing and installing electronic
control units.
Release screw and remove holder (1).
Release screws and remove cover (2) from electronics box.
Note:
Release screws on seal (3) only when removing wiring harness.
Installation:
Insert tabs (1) in openings (2) and close cover.
RA Replacing fan for electronics box (N52)
BMW AG - TIS
11.02.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
