7 Series E65 740i (N62TU) SAL
13 54 030
Removing and installing/sealing throttle valve
assembly (N62, N62TU)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove air intake hose
Unlock plug (1) and remove.
Release screws.
Remove throttle assembly (2).
Installation:
Replace sealing ring (1) of throttle assembly (2).
Installation:
Now clear the fault memory.
RA Removing and installing/sealing throttle valve assembly (N62, N62TU)
BMW AG - TIS
11.02.2013 03:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
