7 Series E65 740i (N62TU) SAL
Installation:
If necessary, move power steering gear to straight-ahead position
- markings on cap (1) and housing (2) must match up.
Release clamping screw.
Grip steering spindle lower section and pull out universal joint with
corrugated tube downwards.
Installation:
Universal joint can only be attached in one position to lower
section of steering spindle.
Replace clamping screw.
Tightening torque 32 31 13AZ
.
RA Replacing universal joint for lower section of steering spindle
BMW AG - TIS
11.02.2013 05:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
