7 Series E65 740i (N62TU) SAL
Warning!
Danger of injury!
Airbag unit may only be set down with the airbag itself facing
upwards.
Unclip airbag unit (1) in lower area and fold towards rear.
Disconnect plug connection (2) and remove airbag unit (1).
Installation:
Make sure electrical leads are correctly positioned.
Snap airbag unit with uniform pressing force plane-parallel in
direction of steering column shaft into steering wheel.
Replacement:
Disconnect plug connections on airbag unit and remove
connecting cable.
Installation:
Connect plugs to connections of same colour on airbag unit.
RA Removing and installing / replacing airbag unit (basic steering wheel)
BMW AG - TIS
11.02.2013 05:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
