bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Safety Regulations For Handling Components With Gas Generators > < 4 RA Notes On Scrapping BMW Vehicles With Gas Generators (vehicles With Safety Inform
Page 2
background image

Warning!

Once gas generators have been fired, observe a ventilation period of 10 minutes with the doors opened. Only
then is it permitted to continue work inside the vehicle.

Wear protective goggles and protective gloves when handling a fired gas generator!

The burning of solid fuel will heat up the airbag unit - danger of burning hands!

Wash skin with water after contact with fired gas generators!

 

1. Vehicles with safety information module (all airbags, seat belt tensioners, safety battery terminal)

 

Note:

It is not possible to fire all the airbag units via the safety information module.

1.0 Expose sensors of all airbag units.

1.1 Connect "Airbagmaster" and adapter cable for "ISIS" vehicles. For subsequent procedure, refer to SEDA operating

instructions. 

RA  Notes on scrapping BMW vehicles with gas generators (vehicles with safety inform

BMW AG - TIS

11.02.2013  05:44

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Safety Regulations For Handling Components With Gas Generators > < 4 RA Notes On Scrapping BMW Vehicles With Gas Generators (vehicles With Safety Inform