7 Series E65 740i (N62TU) SAL
35 11 000
Removing and installing mounting block for
pedals
Important!
Check the function after installation.
Remove panel for pedal assembly.
Release screw (1) on footwell air duct. First pull footwell air duct to
left, then remove towards bottom front.
Detach retaining clip on brake pedal (1).
Withdraw pin.
Release nuts (2).
Installation:
Replace nuts (2).
Tightening torque, 35 11 1AZ .
Remove brake light switch (1).
Release nut (2) for brake pedal.
Installation:
Replace nut (2).
Tightening torque, 35 11 1AZ .
RA Removing and installing mounting block for pedals
BMW AG - TIS
11.02.2013 07:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
