7 Series E65 740i (N62TU) SAL
36 11 527
Removing and installing/replacing rear
receiving antenna for RDC
Operations for removing and installing receiving antenna at rear
left or right are identical.
Remove rear left or right wheel arch trim.
Note:
Holder with receiving antenna is detached by removal of wheel
arch trim.
Observe safety instructions on raising the vehicle.
Unlock plug (1) and disconnect.
Detach receiving antenna with fixture (2) from threaded pin (3).
Unlock retaining lugs (1) and unclip receiving antenna (2).
RA Removing and installing/replacing rear receiving antenna for RDC
BMW AG - TIS
11.02.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
