7 Series E65 740i (N62TU) SAL
Mark severance cut (1) on outer entrance attachment and cut.
Measurement a = approx. 50 mm from edge of hole (2) dia.
30 mm.
Open weld joints on section (3) of outer entrance attachment.
View: wheel arch, front
Open weld joints in areas (1).
Mark severance cuts in accordance with specified measurements and cut.
Measurement a = approx. 150 mm before rectangular hole 10 mm x 6 mm.
Caution!
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
11.02.2013 08:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
