7 Series E65 740i (N62TU) SAL
51 21 795
Disassembling and assembling outside
handle for painting
Necessary preliminary tasks:
•
Remove outside handle
Release screws (1) and remove light module (2).
Important!
For further tasks, protect optical waveguide connection
against damage and contamination (masking/fabric/insulating
tape).
Installation:
Seals (2) on light module (1) must not be damaged or missing.
Release screw (1).
Release clamping pins (2 and 5).
Specification with Comfort Access/CA:
Remove cable strap (3).
Note down plug coding of plug (4).
Disconnect cable (4) from plug.
RA Disassembling and assembling outside handle for painting
BMW AG - TIS
11.02.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
