7 Series E65 740i (N62TU) SAL
51 24 100
Removing and installing/replacing rear lid
lock (upper section)
Necessary preliminary tasks:
•
Remove panel for rear lid
Unlock catch (1) and detach Bowden cables (2 and 3) from
rear lid lock upper section (5).
Version with manual unlocking:
Installation:
Bowden cable (2) must be correctly positioned in guide (4).
Release screws (1).
Unscrew rear lid lock upper section (2), disconnect plug
connection and remove.
Tightening torque 51 24 5AZ
.
Installation:
Perform function check with rear lid open.
•
Adjust rear lid lock
RA Removing and installing/replacing rear lid lock (upper section)
BMW AG - TIS
11.02.2013 10:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
