7 Series E65 740i (N62TU) SAL
51 43 251
Removing and installing / replacing trim for
rear left or right roof pillar (rear)
Warning!
Version with head airbag:
Follow safety instructions for working on cars with airbag
systems.
Important!
Do not use any sharp-edged tools to remove trim (risk of
damage to head airbag).
Version with head airbag in rear compartment:
If necessary, lever out airbag emblem (1) and release screw
underneath.
Tightening torque 51 43 1AZ
.
Release clips (2) and catches (4) from trim (3).
Pull out trim (3) towards inside at top.
Installation:
If necessary, replace defective grommets (1).
Installation:
Retainer (1) on trim (2) must not be damaged or missing.
RA Removing and installing / replacing trim for rear left or right roof pillar (rea
BMW AG - TIS
11.02.2013 11:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
