7 Series E65 740i (N62TU) SAL
Release screws (1).
Remove gas cartridge complete with holder (2).
Release screws (1) on left and right.
Installation:
Insert screws (1) with Loctite.
Tightening torque 52 10 18AZ
.
Slide top rail (3) off bottom rail (2).
Remove gas cartridge (4).
Installation:
Gas cartridge (1) is secured in holder by guide lug (2).
Procedure after triggered active head restraint:
-
Push head restraint back into original position.
-
Insert new gas cartridge.
Note:
The gas cartridge may be replaced up to 5 times.
RA Replacing gas cartridge for active head restraint on left or right front seat
BMW AG - TIS
11.02.2013 12:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -