7 Series E65 740i (N62TU) SAL
61 35 795
Removing and installing (replacing) control
unit for adaptive headlight
Necessary preliminary tasks:
•
Remove safety information module.
Unfasten plug connection (1) and disconnect.
Unlock catch (2) in direction of arrow.
Pull control unit for adaptive headlight (3) out of equipment
carrier (4) and remove.
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) control unit for adaptive headlight
BMW AG - TIS
11.02.2013 14:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
