bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing_replacing Left Or Right Rear Light (from 03_2005) (on Re > < 5 RA Replacing Sealing Frame For Rear Light (on Centre Of Rear Lid)
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (on side panel)

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Open flap in luggage compartment panel.

Disconnect plug connection (1).

Release nuts (2) and remove rear light (3) outwards in direction
of arrow.

Installation:

Make sure gap (outer) is uniform all round between rear light (3)
and side panel.

Make sure sealing frame is correctly seated; replace sealing frame
if necessary.

Replacement:

Remove socket housing for rear light.

If necessary, remove bulbs.

RA  Removing and installing/replacing left or right rear light (on side panel)

BMW AG - TIS

11.02.2013  15:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing_replacing Left Or Right Rear Light (from 03_2005) (on Re > < 5 RA Replacing Sealing Frame For Rear Light (on Centre Of Rear Lid)