7 Series E65 740i (N62TU) SAL
Release screws (1).
Lay fuse-carrier (2) to one side.
Unscrew nuts (3).
Unscrew nuts (1).
Detach support tube (2) and remove from vehicle with assistance
of a second person.
•
Remove soundproofing on left and right from heater
•
Disconnect plug connections
•
If necessary, release wiring harness and lay to one side
Installation:
Make sure soundproofing on left and right is correctly seated.
Ensure correct wiring harness routing.
Unscrew nuts (1).
Remove heater (2) in direction of arrow.
Installation:
Make sure heater (2) is correctly seated.
RA Removing and installing/replacing heater
BMW AG - TIS
11.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
