7 Series E65 740i (N62TU) SAL
65 24 020
Removing and installing or replacing blocking
circuit
Necessary preliminary tasks:
•
Remove trim on C-pillar at bottom right
Note:
For purposes of clarity, the illustration shows the panel for the rear
parcel shelf removed.
Disconnect plug connections (1).
Release screw (2) and remove blocking circuit (3) in direction of
arrow from rear window antenna amplifier.
Installation:
Make sure guide pin (1) of blocking circuit (2) is correctly seated
in bore in rear window antenna amplifier.
RA Removing and installing or replacing blocking circuit
BMW AG - TIS
11.02.2013 17:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
