7 Series E65 740i (N62TU) SAL
Unfasten plug connection (1) and disconnect.
Feed B-pillar sensor (2) in direction of arrow out of B-pillar and
remove.
Installation:
For improved positioning, guide B-pillar sensor (1) if necessary
through opening in B-pillar (2).
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) left B-pillar sensor
BMW AG - TIS
11.02.2013 17:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
