7 Series E65 740i (N62TU) SAL
66 54 005
Removing and installing/replacing control
unit for Night Vision System
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove safety information module.
Disconnect plug connection (1), press lug (2) downwards and
remove control unit (3) from module carrier.
Replacement:
Carry out coding/programming.
Note:
New component contains a CD with deblocking code.
CD is requested during coding/programming by the SSS.
RA Removing and installing/replacing control unit for Night Vision System
BMW AG - TIS
11.02.2013 17:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
