7 Series E65 740i (N62TU) SAL
67 31 600
Removing and installing/replacing drive for
seat longitudinal/tilt adjustment (comfort
seats in rear compartment)
Necessary preliminary tasks:
•
Remove rear seat padding completely.
Detach retainers (1) at both rubber straps and pull gap cover (2)
forwards slightly.
Cut through cable ties (1) and pull gap cover (2) downwards.
Installation:
Make sure cable ties are correctly positioned.
Release both clips (3) and remove trim (4) towards top.
RA Removing and installing/replacing drive for seat longitudinal/tilt adjustment (c
BMW AG - TIS
11.02.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
