7 Series E65 740i (N62TU) SAL
72 11 302
Removing and installing/replacing all seat
belts (comfort)
Necessary preliminary tasks:
•
Remove trim for parcel shelf
•
Remove rear seat
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling may trigger the pyrotechnical seatbelt
tensioner or side airbag and thereby cause injuries.
Switch off ignition!
Release screws (1) on left and right.
Remove upper strap (2) on left and right.
Installation:
Guide lug of belt retractor must be seated in opening in body.
Unscrew nut (3).
Remove upper strap (4).
Installation:
Tightening torque 72 11 20AZ
.
Release screws (1).
Remove lower strap (2) on left and right.
Remove lower strap (3) (except E67).
Installation (except E67):
Holder for lower strap (3) must be fitted below lower strap on
right (2).
Tightening torque 72 11 21AZ
.
RA Removing and installing/replacing all seat belts (comfort)
BMW AG - TIS
11.02.2013 18:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
