7 Series E65 745d (M67TU) SAL
11 12 105
Removing and installing right cylinder head
(M67TU)
Special tools required:
•
00 2 530
•
00 9 120
Fit new cylinder head screws.
Do not wash off bolt coating.
Replace cylinder head gasket.
There must not be any coolant, water or oil present in the pocket
holes (risk of corrosion and cracking).
Sealing faces on cylinder head and on crankcase must not be
machined.
Necessary preliminary tasks:
•
Disconnect battery negative terminal.
•
Remove engine.
•
Remove fan cowl,
•
Drain and top up coolant,
•
Remove intake air manifold,
•
Remove left cylinder head cover.
•
Remove H.P. pump.
•
Remove and install left camshafts,
•
Remove all glow plugs.
RA Removing and installing right cylinder head (M67TU)
BMW AG - TIS
12.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -