7 Series E65 745d (M67TU) SAL
11 12 111
Replacing right cylinder head gasket (M67TU)
Necessary preliminary tasks:
•
Remove right cylinder head.
Without working on crankshaft drive or piston to alter piston
protrusion, use a new cylinder head gasket with same number of
holes (1).
This illustration shows a 1-hole cylinder head gasket.
Check guide sleeves (1 and 2) for damage and correct seating.
Installation:
Cylinder head gaskets for cylinders 1 to 4 and 5 to 8 are
different.
Place new cylinder head gasket in position.
Check cylinder head for deviation from flatness.
Check cylinder head for water leaks.
Assemble engine.
RA Replacing right cylinder head gasket (M67TU)
BMW AG - TIS
12.02.2013 13:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -