7 Series E65 745d (M67TU) SAL
Secure radial shaft seal (1) with support ring (2) to special tool
11 9 513.
Pull radial shaft seal (1) over special tool 11 9 513 without
engine oil.
Position radial shaft seal approx. 5 mm before timing case.
Remove special tool 11 9 513.
Draw in radial shaft seal with special tools 11 9 514 and
11 9 515.
RA Replacing radial seal on crankshaft sprocket wheel (M67)
BMW AG - TIS
12.02.2013 13:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
