7 Series E65 745d (M67TU) SAL
Carefully push on end cover (1) so that it is straight.
Insert screws (2).
Insert screws (3).
Installation:
Screws (2 and 3) differ in length (risk of damage).
One bore of special tool 11 5 311 must point to crankshaft
adapter sleeve.
Screw special tool 11 5 311 onto crankshaft with screws (1).
Attach radial shaft seal (1) with support bushing (2) to special
tool 11 5 311 .
Push on radial shaft seal (1) over support bushing (2).
Position radial shaft seal (1) approx. 5 mm before end cover.
Remove support bushing (2).
RA Replacing crankshaft radial seal (M67TU)
BMW AG - TIS
12.02.2013 13:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
