7 Series E65 745d (M67TU) SAL
11 23 010
Removing and installing or replacing
vibration damper (M67, M67TU)
Special tools required:
•
00 9 120
•
11 6 480
•
11 8 182
Necessary preliminary tasks:
•
Remove underbody protective plate
•
Remove alternator drive belt.
•
Remove A/C compressor drive belt
Release screws (1) on transmission at bottom.
Tightening torque 24 00 1AZ
.
Note:
Prior to installation, slacken bolts on special tool 11 8 182 .
Install and tighten down screws (1).
Tighten down screws (2).
RA Removing and installing or replacing vibration damper (M67, M67TU)
BMW AG - TIS
12.02.2013 13:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -