7 Series E65 745d (M67TU) SAL
Important!
Before opening conrod bearing caps, crank relevant piston to
BDC.
Release connecting rod bolts (1) with special tool 12 2 100 .
Remove conrod bearing cap.
Important!
Risk of damage to cylinder wall.
Attach/screw in special tool 11 5 480 on conrod.
Observe procedure for all cylinders.
Note:
Figure shows crankshaft removed.
Carefully slide conrod and piston with special tool 11 5 480 out
of cylinder.
Important!
Risk of damage to cylinder wall.
Remove conrod with piston (1) from cylinder head end.
RA Removing and installing/replacing all pistons (M67TU)
BMW AG - TIS
12.02.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
