7 Series E65 745d (M67TU) SAL
Crank engine at vibration damper with special tool 11 6 480 in
direction of rotation to shortly before TDC.
Bolt (3) must be removed beforehand as it is no longer
accessible in TDC position.
Continue to crank engine slowly.
Insert special tool 11 5 180 into alignment bore on flywheel.
Note:
The engine is correctly aligned when the markings on the
crankshaft face each other on the sides.
Important!
If the engine is not correctly aligned, rotate the crankshaft
through 360
°
in the direction of rotation and realign.
RA Replacing both left camshafts (M67TU)
BMW AG - TIS
12.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
