7 Series E65 745d (M67TU) SAL
Release chain tensioner (1).
Note:
Illustrations show M67.
Important!
Do not release vacuum pump retaining bolts.
Release screws (1).
Important!
Do not allow timing chain to drop into crankcase.
Raise timing chain.
Remove sprocket wheel (2).
Tie up timing chain with a cable tie.
Evenly release screws of camshaft bearing caps in 1/2 turn steps
from outside to inside.
Remove bearing covers and place to one side in orderly fashion.
Note:
Illustrations show M67.
Remove exhaust camshafts (1) and carefully place to one side.
Remove inlet camshafts (2) and carefully place to one side.
Note:
Illustrations show M67.
RA Replacing both right camshafts (M67TU)
BMW AG - TIS
12.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -