7 Series E65 745d (M67TU) SAL
Secure special tools 11 8 122 and 11 8 121 on camshafts.
Installation:
Pay attention to position of cams on exhaust and inlet camshafts.
Important!
Do not allow timing chain (1) to drop into engine block.
Raise timing chain.
Install sprocket wheel (2) on left stop.
Insert screws (1).
Replace sealing ring (1).
Insert chain tensioner (1) and tighten down.
Tightening torque: 11 31 4AZ
.
RA Replacing both right camshafts (M67TU)
BMW AG - TIS
12.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -