Replacing Both Right Camshafts on 7 Series E65 745d (M67TU) SAL Engine
Important!
The timing is incorrectly set if bolts (1) are tightened down
without the chain tensioner fitted.
Tighten down screws (1).
Tightening torque: 11 31 1AZ
.
Remove special tool 11 8 120 .
Remove special tool 11 5 180 .
Using special tool 11 6 480 , crank engine at vibration damper in
direction of rotation through 720
°
.
Installation:
Screw (3) on sprocket wheel screw connection can now be
inserted.
Tightening torque: 11 31 1AZ
.
RA Replacing both right camshafts (M67TU)
BMW AG - TIS
12.02.2013 13:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -