7 Series E65 745d (M67TU) SAL
Installation:
Screw in special tool 13 5 400 hand-tight.
Installation:
Replace sealing ring (1).
Apply a thin coat of antiseize agent to sealing ring (1) to
facilitate installation.
Installation:
Rotate drive of high-pressure pump (1) until both markings
are in alignment.
Installation:
Special tool 13 5 400 is used to guide high-pressure
pump (1).
Fit high-pressure pump (1) and flange-mount uniformly.
Install and tighten down screws.
Release special tool 13 5 400 , insert screw and tighten down.
RA Removing and installing / replacing high-pressure pump (M67, M67TU)
BMW AG - TIS
12.02.2013 14:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
