7 Series E65 745d (M67TU) SAL
13 62 586
Removing and installing / replacing pressure
sensor for exhaust system on right (M67TU)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit.
•
Switch off ignition
•
Remove acoustic cover
Unlock plug (1) and remove.
Unlock lug (2) and slide pressure sensor (3) in direction of
arrow.
Pull off hose.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing / replacing pressure sensor for exhaust system on right
BMW AG - TIS
12.02.2013 14:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
