bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

16 Fuel Supply System (M67TU) > < 3 RA Removing And Installing Raw Air Housing (M67, M67TU)
Page 1
background image

13 72 002

Replacing both air filter elements (M67,
M67TU)

Note:

Illustrations show and descriptions refer to the left intake filter
housing. The procedure is identical for the right filter housing.

Air filter, right/left:

Open clips (1).

Release clamp (2) and detach hose. 

Unlock and detach plug connection (3).

Remove upper section of intake filter housing (4).

Remove air filter element (1).

Installation:

Clean insides of upper and lower sections of suction filter housing.

Install new air filter element.

Check seal between air-mass flow sensor and top section of
intake filter housing for damage and replace if necessary.

RA  Replacing both air filter elements (M67, M67TU)

BMW AG - TIS

12.02.2013  14:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

16 Fuel Supply System (M67TU) > < 3 RA Removing And Installing Raw Air Housing (M67, M67TU)