7 Series E65 745d (M67TU) SAL
24 40 010
Removing and installing/replacing torque
converter (GA6HP26Z/6HP32Z)
Special tools required:
•
24 4 000
Important!
After completion of work, check transmission oil level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove automatic transmission
Screw special tool 24 4 000 into torque converter.
Remove torque converter.
Note:
When torque converter is removed, transmission oil flows out.
RA Removing and installing/replacing torque converter (GA6HP26Z/6HP32Z)
BMW AG - TIS
12.02.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -