7 Series E65 745d (M67TU) SAL
32 33 000
Removing and installing / replacing steering
wheel
Note:
Wheel/chassis alignment is not necessary after the steering wheel
has been removed and installed or replaced.
Necessary preliminary tasks:
•
Remove airbag unit
Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.
Installation:
Tightening torque 32 33 1AZ
.
Important!
Risk of damage!
Locking pin (1) must engage in recess of driver (2).
Installation:
Align steering wheel using grooved toothing to steering column
and attach.
RA Removing and installing / replacing steering wheel
BMW AG - TIS
12.02.2013 16:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
