7 Series E65 745d (M67TU) SAL
51 32 170
Removing and installing / replacing door
window glass, front left or right
Necessary preliminary tasks:
•
Open door window to 140 mm.
•
Remove function carrier in front door
•
Remove outer window cavity cover strip
Door window glass must be opened to dimension (A).
A = approx. 140 mm
Unfasten screws (1).
Installation:
Tightening torque 51 32 2AZ
.
Rubber (2) is only fitted at rear.
Turn door window glass and lift out towards rear/top.
Installation:
Bores (1) of door window glass (5) must not be damaged.
If necessary, install new screws (2), washers (3) and plastic
washers (4).
Adjust door window glass.
RA Removing and installing / replacing door window glass, front left or right
BMW AG - TIS
12.02.2013 22:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -