7 Series E65 745d (M67TU) SAL
Release screws (1) and remove refrigerant lines.
Release screw (2).
Installation:
Replace all sealing rings and moisten with refrigerant oil
Tightening torque 64 52 3AZ
.
Secure compressor (2) against falling out.
Release bolts (1) and feed out compressor (2).
Tightening torque 64 52 3AZ
.
If necessary, replace damaged adapter sleeves.
After installation:
•
Evacuate and fill A/C system
•
Fill and vent coolant system
RA Replacing A/C system compressor (M67TU)
BMW AG - TIS
13.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
