7 Series E65 745d (M67TU) SAL
65 50 120
Removing and installing/replacing rear
compartment monitor
Necessary preliminary tasks:
•
Remove center armrest (front).
Release screws (1).
Unclip side trims (2) in direction of arrow and remove.
Release screws (1).
Feed out rear center armrest trim (2) in direction of arrow from
center armrest (3) and pull back.
Note:
Detaching rear compartment monitor mountings is shown on left
side; proceed in same way for detaching on right side.
Release screw (1).
Installation:
Tightening torque, 65 52 2AZ .
Release screw (2) and remove rear compartment monitor
mounting (3) in direction of arrow.
Installation:
RA Removing and installing/replacing rear compartment monitor
BMW AG - TIS
13.02.2013 04:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -