7 Series E65 745d (M67TU) SAL
65 77 760
Removing and installing (replacing) rear seat
sensor
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Note:
Follow instructions for handling optical fibers.
Necessary preliminary tasks:
•
Disconnect battery negative lead and cover.
•
Remove rear seat (normal).
•
Remove center seat section (comfort seat).
Release screws (1).
Installation:
Tightening torque 65 77 8AZ
.
Make sure sensor is mounted without play.
Unlock plug connections (2) and disconnect.
Remove rear seat sensor (3).
RA Removing and installing (replacing) rear seat sensor
BMW AG - TIS
13.02.2013 04:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -