7 Series E65 745i (N62) SAL
00 00 610
Engine oil service (N62/N62TU)
Recycling:
Catch and dispose of used oil.
Observe country-specific waste-disposal regulations.
Note:
For purposes of clarity, this work step is shown without the
reinforcement plate.
Open oil drain plug (1) in oil sump.
Remove oil drain plug (2) on oil filter cap (3).
Release oil filter cover (3).
Installation:
Replace and lubricate sealing rings (1 and 2).
Replace oil filter element (3) and slide into oil filter cover.
Oil filter element (3) must snap audibly into place.
Installation:
Replace sealing ring.
Install oil drain plug (1) and tighten down.
Tightening torque 11 13 1AZ
.
Insert and tighten down oil filter cover (3).
Tightening torque 11 42 2AZ
.
Insert oil drain plug (2) on oil filter cap (3) and tighten down.
Tightening torque: 10 Nm.
RA Engine oil service (N62/N62TU)
BMW AG - TIS
14.02.2013 02:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -