7 Series E65 745i (N62) SAL
Note:
Spring mount (1) has a locating pin opposite screw.
Release screw.
Feed spring mount (1) upwards out of locating pin.
Note:
Illustration with engine removed.
Remove eccentric shaft sensor (2).
Detach guide rail from cylinder head.
Release screws between cylinder head and timing case cover.
RA Removing and installing right cylinder head (N62 to 9/03)
BMW AG - TIS
14.02.2013 02:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
