7 Series E65 745i (N62) SAL
11 21 500
Replacing crankshaft (N62 / N62TU)
Operation:
Note:
Remove engine
Remove cylinder head (cylinder bank 1 to 4)
Remove cylinder head (cylinder bank 5 to 8)
Remove hub for vibration damper
Removing lower timing case cover
Removing oil pan
Remove oil pump
Removing piston
Remove flywheel
Release main bearing inclined screw connection (1).
Installation:
Tightening torque 11 11 3AZ
.
Release spacer bolt (2).
Tightening torque 11 11 3AZ
.
Release main bearing screws.
Tightening torque 11 11 2AZ
.
RA Replacing crankshaft (N62 / N62TU)
BMW AG - TIS
14.02.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -