7 Series E65 745i (N62) SAL
Release screws (1).
Remove lower panel (2) at rear left.
Unfasten hose clip (1).
Detach hose (2) from tank.
Installation:
Replace hose clip.
Seal hose with special tool 16 1 060 .
Release hose clamps (1 and 2).
Disconnect lines and unclip from holder.
(1)
Tank vent
(2)
Fuel tank vent
(3)
Scavenging air line
Installation:
Replace hose clips.
RA Removing and installing fuel tank
BMW AG - TIS
14.02.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -