7 Series E65 745i (N62) SAL
Remove front splash guard.
Drain, catch and dispose of coolant from radiator.
Remove reinforcement plate.
Open drain plug (1) on engine block.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque, 11 11 5AZ .
Adding coolant:
Vent cooling system and check for leaks.
RA Draining and adding coolant (N62)
BMW AG - TIS
14.02.2013 16:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -