7 Series E65 745i (N62) SAL
32 31 211
Replacing universal joint for lower section of
steering spindle
Warning!
Scalding hazard!
Only perform this work after engine has cooled down.
Important!
Observe safety instructions on raising the vehicle.
After installation:
•
Carry out steering angle sensor adjustment
Necessary preliminary tasks:
•
Move steering wheel to straight-ahead position and remove
ignition key
•
Remove steering gear cover at side
Release clamping screw.
Detach universal joint from power steering gear.
Installation:
Replace clamping screw.
Tightening torque 32 31 14AZ
.
RA Replacing universal joint for lower section of steering spindle
BMW AG - TIS
14.02.2013 18:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -