7 Series E65 745i (N62) SAL
41 61 000
Removing and installing hood lid
Necessary preliminary tasks:
•
Remove and install both gas-filled struts for engine hood.
The following illustration serves as a general guide and is to be
applied to the relevant vehicle type.
Release screw (1).
Loosen screw (2).
Remove hood lid.
Installation:
Install engine hood at screw locations on hinge. This dispenses
with the need for adjustment after installation.
If this is not possible, adjust engine hood.
RA Removing and installing hood lid
BMW AG - TIS
14.02.2013 21:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -