7 Series E65 745i (N62) SAL
51 33 000
Removing and installing power window unit
in left or right front door
Necessary preliminary tasks:
•
Remove front door window glass
•
Remove door brake for front door
Slacken screws (1)
Slacken screw (2) and remove retaining clip (3).
Tightening torque 51 33 2AZ
.
Installation:
Make sure guide (1) is correctly seated when fitting retaining
clip (2).
Release cable tie (1).
Disconnect plug connection (2) on drive.
Release screws on power window unit above bores (3).
Tightening torque 51 33 2AZ
.
RA Removing and installing power window unit in left or right front door
BMW AG - TIS
14.02.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -