7 Series E65 745i (N62) SAL
Installation:
Following parts of wood trim (4) must not be damaged or missing:
1
Shaft
2
Speed nut
3
Stud
Installation:
If necessary, replace damaged clip (1) (Hutfix).
Replacing clip (Hutfix):
A
Turn clip (1) with screwdriver to left by approx. 60
°
.
B
Lever out clip (1) from below.
Installation:
A
Insert clip (1) from above and snap into place at bottom.
Then turn clip (1) with screwdriver to right by approx. 60
°
.
B
Clip (1) in end position.
RA Removing and installing/replacing wood trim on left
BMW AG - TIS
15.02.2013 00:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -