7 Series E65 745i (N62) SAL
Release nuts (1) and remove cover (2).
Release screws (1).
Remove holder (2) for function carrier.
Release screw (1) and nuts (2).
Move front seats back as far as possible.
Pull off instrument panel (3) in direction of arrow and lift out to right
front door.
Installation:
Fit new seals (pressed and vacuum-packed) shortly before
installing instrument panel.
If necessary, compact old seals (1) (if well preserved) between
two wooden blocks under high pressure for approx. 15 minutes.
Slide instrument panel with guides correctly into
fixtures (2) and (3).
RA Removing and installing instrument panel trim
BMW AG - TIS
15.02.2013 00:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -